Motors & Drives
LV & MV Motors, Variable Speed Drives & Geared Motors
We supply electric motors and variable speed drives from 0.09 kW to 110 MW (WEG S Line synchronous, 220 – 15,000 V) — low-voltage, medium-voltage and high-voltage, in standard, high-efficiency and flameproof designs.
Whether you are replacing a single motor or specifying the complete drive train for a new line, send us the duty data. We select the motor, match the drive, and quote the matched package.
What we supply
Low-voltage motors
- Innomotics SIMOTICS low-voltage motors (0.09 – 5,300 kW)
- WEG W22 cast iron (0.12 – 500 kW, IE2 – IE5)
- WEG W21 aluminium Multimounting (0.16 – 330 kW)
- WEG W40 ODP (11 – 800 kW)
- WEG W51 HD heavy duty (75 – 1,250 kW)
- WEG W23 Sync+ permanent magnet (IE5, 0.75 – 1,250 kW)
- ABB IEC / NEMA low-voltage motors, IE5 SynRM (0.75 – 450 kW)
- KSB SuPremE synchronous reluctance motors (IE4 / IE5)
Medium-voltage & high-voltage motors
- Innomotics HV C — up to 2.5 MW, shaft height ≤560 mm, IP55
- Innomotics HV M — up to 29 MW, 0.38 – 13.8 kV, shaft height 355 – 900
- Innomotics HV HP — asynchronous 1.8 – 38 MW (efficiency up to 98.2%), synchronous 8 – 70 MW (up to 98.8%)
- WEG M Line — up to 50,000 kW, 220 – 13,800 V, IP23 – IP65
- WEG S Line synchronous — up to 110,000 kW, 220 – 15,000 V
- WEG W60 — 185 – 16,000 kW, 380 – 13,800 V
Low-voltage drives
- Siemens SINAMICS V20 · G120 · G120C (general purpose)
- Siemens SINAMICS S200 · S210 · S120 (servo)
- ABB ACS480 (0.75 – 22 kW) · ACS580 (0.75 – 500 kW) · ACS380 (0.25 – 22 kW)
- ABB ACS880 industrial drives (0.55 – 6,000 kW, 230 – 690 V)
- ABB ACQ580 for water and wastewater (0.37 – 500 kW)
- WEG CFW500 (0.18 – 132 kW) · CFW11 / CFW11 IP55
Medium-voltage drives
- Innomotics Perfect Harmony GH150 / GH180 — 2.3 – 11 kV, 0.12 – 25 MW
- Innomotics GM150 — 2.3 – 6.6 kV, 1 – 21 MVA
- Innomotics SM150 — IGCT water-cooled 3.3 kV, 5 – 31.5 MVA
- Innomotics GL150 (LCI) — 1.4 – 10.3 kV, 1 – 85 MVA
- ABB ACS580MV — 200 kW – 6.3 MW, 3.3 – 11 kV
- ABB ACS8080 — 300 kW – 6.7 MW, 3.3 – 6.9 kV
- ABB ACS6080 — 5 – 36 MW, 2.3 – 3.3 kV
DC drives
- ABB DCS880 — up to 5,200 A DC, up to 1,500 V DC, SIL 3 / PL e
Specification at a glance
Typical ranges — motors
| Power range | 0.09 kW – 110 MW |
|---|---|
| Voltage | 400 V / 6 kV / 11 kV / 13.8 kV |
| Efficiency class | IE2 · IE3 · IE4 · IE5 |
| Protection | IP23 – IP66 |
| Flameproof | Ex db (Zone 1/2) · Ex eb (Zone 1) · Ex ec (Zone 2) · Ex tb / tc (Zone 21/22) |
| Desert-duty ambient | −55 °C to +60 °C (W22X frames 560 – 710, 500 – 4,500 kW) |
Typical ranges — drives
| Low-voltage drives | 0.18 – 6,000 kW, 200 – 690 V |
|---|---|
| Medium-voltage drives | 2.3 – 11 kV, 0.12 – 36 MW |
| MV drive efficiency | Approx. 97 – 98% |
| Altitude | Up to 1,000 m without derating (typical) |
Brands we supply
Other Brands Available on Request
Beyond the brands shown here, we also source and supply spare units and parts for most international and Chinese industrial brands. Not sure what you have? Send us a photo of the nameplate — we will identify the unit and quote the original part.
Why work with us
- One supplier for the whole drive train — motor, drive, gearbox, coupling and starter matched to each other.
- Selection against your duty data: ambient temperature, altitude, starts per hour and duty cycle.
- Ranges from 0.09 kW to 110 MW (WEG S Line synchronous), low voltage through high voltage.
Service & support
Remote and on-site support available, from installation supervision to commissioning and troubleshooting.
What we need from you to quote
For replacements, send a nameplate photo — we identify the exact unit and quote the original part.
- Rated power and speed (kW / rpm), or the duty to achieve
- Supply voltage, frequency and number of phases
- Mounting arrangement, shaft height and ambient conditions
- Quantity, destination port and required delivery date
Answers before you ask
Frequently asked questions
Which motor brands do you supply?
We supply Innomotics, WEG, ABB and Siemens motors and drives, and we also source most other international and Chinese brands on request.
Can you help me choose between a medium-voltage drive and a soft starter?
Yes. We compare both against your starting torque, current limit and process control requirements, and show the cost and energy difference before you decide.
Do you supply flameproof motors for Zone 1 and Zone 21?
Yes. We supply Ex db, Ex eb, Ex ec and Ex tb / tc motors with the certification package required for your destination country.
Can you replace a motor from a brand you do not list?
Yes. Send us the nameplate photo and we will identify the unit, then quote the original part.
Do you only supply the eight brands shown on your homepage?
No. We source and supply spare units and parts for most international and Chinese industrial brands, not only the eight brands shown on this site.
I do not know the exact model number. Can you still quote?
Yes. Send us a photo of the nameplate and we will identify the exact unit before preparing the quotation for the original part.
Do you supply genuine original manufacturer parts?
Yes. We supply genuine original manufacturer parts. Send us a photo of the nameplate and we can identify the exact unit before quoting, so you do not need to look up a model number.
Do you provide installation guidance, commissioning and after-sales support?
Yes. We provide installation guidance, commissioning support and after-sales support, remotely or on site depending on your project.
What is the delivery time?
Lead time depends on the product and configuration. We confirm the delivery schedule together with the quotation, so you have a firm date before you order.
Which export documents and certificates can you provide?
We can provide applicable CE and ISO documentation, certificates of origin, packing lists and test reports according to the requirements of your destination country.
What payment terms and incoterms do you work with?
We accept T/T and L/C payment, and quote FOB, CIF or EXW terms to suit your project.
Send us your duty data and we will select it for you
A nameplate photo is enough to start. We identify the unit, confirm the specification and quote the original part.
Request a Quotation