WEG Motors, Variable Speed Drives & Gear Units
We supply WEG motors from 0.12 kW to 110 MW — cast iron, aluminium, ODP, high-efficiency IE5 and flameproof designs — together with CFW variable speed drives and WG20 gear units.
WEG combines very short lead times on standard ranges with genuine heavy-duty capability above 1 MW, which is why it is often the best value route for projects in the Middle East and beyond.
What we supply from WEG Motors, Variable Speed Drives & Gear Units
Cast iron low-voltage motors
- W22 TEFC — 0.12 – 500 kW, IE2 to IE5, frames 63 – 355, IP55
- W51 HD heavy duty — 75 – 1,250 kW, 380 – 6,600 V
- W60 — 185 – 16,000 kW, 380 – 13,800 V, frames IEC 315 – 1000
Aluminium & special designs
- W21 Multimounting aluminium — 0.16 – 330 kW, IE2 to IE4
- W40 ODP drip-proof — 11 – 800 kW, frames 160 – 400
- W23 Sync+ permanent magnet — IE5, 0.75 – 1,250 kW, up to 40% lower losses than IE3
Flameproof motors
- W22Xdb — flameproof, Zone 1 / Zone 2, T4
- W22Xec and W22Xeb — increased safety, Zone 1
- W22Xtb — dust protection, Zone 21 / Zone 22, T125 °C and T160 °C
- Desert-duty frames 560 – 710: 500 – 4,500 kW at −55 to +60 °C
Medium-voltage motors
- M Line squirrel cage and wound rotor — up to 50,000 kW, 220 – 13,800 V
- S Line synchronous — up to 110,000 kW, 220 – 15,000 V, brushless or static excitation
Drives & gear units
- CFW500 — 0.18 – 132 kW, SIL3 / PLe, integrated SoftPLC
- CFW11 and CFW11 IP55 — 380 – 690 V
- WG20 MAS gear units and geared motors — 130 – 18,000 Nm, ratio 3.93 – 24,805
Why work with us
- Selection against your real duty data — ambient temperature, altitude, duty cycle and starting behaviour.
- Spare parts and replacements identified from a nameplate photo, even without the order number.
- Original manufacturer parts, with the brand and series confirmed in writing before you order.
- Dimensional interchangeability checked against your existing motor before a replacement is quoted.
Service & support
Remote and on-site support available, from installation supervision to commissioning and troubleshooting.
What we need from you to quote
For replacements, send a nameplate photo — we identify the exact unit and quote the original part.
- Power, speed, voltage and frequency
- Mounting: foot, flange or combination, and degree of protection
- Efficiency class required, and hazardous area classification if applicable
- Quantity, destination port and required delivery date
See where these products sit in our range: browse all product categories .
Answers before you ask
Frequently asked questions
Do you supply WEG flameproof motors for Zone 1 and Zone 21?
Yes. We supply W22Xdb flameproof motors for Zone 1 and Zone 2, and W22Xtb dust-protected motors for Zone 21 and Zone 22, with the certification package for your destination country.
Can WEG replace a motor from another manufacturer?
In most cases yes. Send us the existing nameplate and mounting dimensions and we will confirm dimensional interchangeability and recommend the WEG unit that matches it.
Do you only supply the eight brands shown on your homepage?
No. We source and supply spare units and parts for most international and Chinese industrial brands, not only the eight brands shown on this site.
I do not know the exact model number. Can you still quote?
Yes. Send us a photo of the nameplate and we will identify the exact unit before preparing the quotation for the original part.
Do you supply genuine original manufacturer parts?
Yes. We supply genuine original manufacturer parts. Send us a photo of the nameplate and we can identify the exact unit before quoting, so you do not need to look up a model number.
Do you provide installation guidance, commissioning and after-sales support?
Yes. We provide installation guidance, commissioning support and after-sales support, remotely or on site depending on your project.
What is the delivery time?
Lead time depends on the product and configuration. We confirm the delivery schedule together with the quotation, so you have a firm date before you order.
Which export documents and certificates can you provide?
We can provide applicable CE and ISO documentation, certificates of origin, packing lists and test reports according to the requirements of your destination country.
What payment terms and incoterms do you work with?
We accept T/T and L/C payment, and quote FOB, CIF or EXW terms to suit your project.
Send us the nameplate and we will do the rest
A photo of the nameplate is enough to start. We identify the unit, confirm the specification and quote the original part.
Request a Quotation