Innomotics Motors & Medium-Voltage Drives
As an authorized distributor, we supply Innomotics motors up to 70 MW (HV HP synchronous, efficiency up to 98.8%), geared motors and Perfect Harmony medium-voltage drives for large industrial drive applications.
Innomotics was established in 2023 as the motors and drives company separated from Siemens, continuing the SIMOTICS motor and medium-voltage drive business with more than 150 years of engineering heritage behind it.
About Innomotics and Siemens
Innomotics was established in 2023 as the independent motors and drives company separated from Siemens, taking over the SIMOTICS motor and medium-voltage drive business with more than 150 years of engineering heritage. The products remain the same proven platforms — SIMOTICS low- and high-voltage motors and Perfect Harmony medium-voltage drives — now delivered under the Innomotics brand. On this site: Siemens pages cover SINAMICS low-voltage drives and SIMATIC automation; Innomotics pages cover motors and medium-voltage drives.
What we supply from Innomotics Motors & Medium-Voltage Drives
Low-voltage motors
- SIMOTICS low-voltage motors — 0.09 – 5,300 kW
- Standard, asynchronous and synchronous designs
- SIMOTICS geared motors SG 2KJ3 — 0.09 – 55 kW, torque up to 19,500 Nm
- Flameproof designs for hazardous areas
High-voltage & high-power motors
- HV C — up to 2.5 MW, shaft height up to 560 mm, IP55
- HV M — up to 29 MW, 0.38 – 13.8 kV, shaft height 355 – 900 mm
- HV HP asynchronous — 1.8 – 38 MW, efficiency up to 98.2%
- HV HP synchronous — 8 – 70 MW, efficiency up to 98.8%
Medium-voltage drives
- Perfect Harmony GH150 and GH180 — 2.3 – 11 kV, 0.12 – 25 MW, efficiency approx. 97%
- GM150 — 2.3 – 6.6 kV, 1 – 21 MVA
- SM150 — IGCT water-cooled 3.3 kV, 5 – 31.5 MVA
- GL150 load-commutated inverter — 1.4 – 10.3 kV, 1 – 85 MVA
- SL150
Motor spindles
- Motor spindles for machine tool applications
Typical applications
Why work with us
- Selection against your real duty data — ambient temperature, altitude, duty cycle and starting behaviour.
- Spare parts and replacements identified from a nameplate photo, even without the order number.
- Original manufacturer parts, with the brand and series confirmed in writing before you order.
- Large motor and MV drive projects handled end to end: rating, cooling, starting and site conditions together.
Service & support
Remote and on-site support available, from installation supervision to commissioning and troubleshooting.
What we need from you to quote
For replacements, send a nameplate photo — we identify the exact unit and quote the original part.
- Required power, speed and voltage
- Starting method: DOL, soft starter or variable speed drive
- Cooling method, degree of protection and ambient conditions
- Quantity, destination port and required delivery date
See where these products sit in our range: browse all product categories .
Answers before you ask
Frequently asked questions
Is Innomotics the same as Siemens?
Innomotics is the independent motors and drives company separated from Siemens in 2023, continuing the SIMOTICS motor and medium-voltage drive business. Siemens continues to supply SINAMICS low-voltage drives and SIMATIC automation hardware.
I have an old Siemens motor. Is it now an Innomotics product?
Most likely. Send us the nameplate photo and we will identify the current supplier and the current-generation successor.
Can you supply medium-voltage drives above 11 kV?
Standard Perfect Harmony units cover 2.3 – 11 kV. For higher requirements, send us your network data and we will identify the right platform.
Do you only supply the eight brands shown on your homepage?
No. We source and supply spare units and parts for most international and Chinese industrial brands, not only the eight brands shown on this site.
I do not know the exact model number. Can you still quote?
Yes. Send us a photo of the nameplate and we will identify the exact unit before preparing the quotation for the original part.
Do you supply genuine original manufacturer parts?
Yes. We supply genuine original manufacturer parts. Send us a photo of the nameplate and we can identify the exact unit before quoting, so you do not need to look up a model number.
Do you provide installation guidance, commissioning and after-sales support?
Yes. We provide installation guidance, commissioning support and after-sales support, remotely or on site depending on your project.
What is the delivery time?
Lead time depends on the product and configuration. We confirm the delivery schedule together with the quotation, so you have a firm date before you order.
Which export documents and certificates can you provide?
We can provide applicable CE and ISO documentation, certificates of origin, packing lists and test reports according to the requirements of your destination country.
What payment terms and incoterms do you work with?
We accept T/T and L/C payment, and quote FOB, CIF or EXW terms to suit your project.
Send us the nameplate and we will do the rest
A photo of the nameplate is enough to start. We identify the unit, confirm the specification and quote the original part.
Request a Quotation